North America - Toll Free 800.295.0220
International - 316.788.2000

Wired Indoor Speakers

UHF Wireless Network VoIP

SPC40RT

The BRG SPC-40RT Indoor Wired Speakers are an economical solution for multiple speakers on a single floor of a building. The emergency messages are sent wirelessly to the MA-1200 Amplifier/receiver and then played on the speakers wired into the system. Depending on the number of speakers required per floor this might be a less expensive option than placing wireless speakers throughout the facility. Discuss what option is best for your situation.


Combined with MA-1200 Amplifier/Receiver, the powerful SPC-40RT 20 Watt wired horn speakers makes them an excellent choice for office paging and public announcements.

These speakers are easily connected to the MA-1200 with two speaker wires. The wired speakers are activated at the same time as BRG’s wireless speakers and message boards.

Speaker wire is not included with the SPC-40RT. However, BRG offers a variety of speaker wire as an option to meet your installation needs.

Speakers require the purchase of a MA-1200 to operate with the BRG EMN System.

 

SPC40RT Wired Indoor Speaker Features:

  • 20 Watts RMS Power/ 100V
  • 250 Ohm Impedance
  • Plastic horn
  • Plastic cover
  • Aluminum ring
  • Steel mounting bracket
  • Sensitivity: 108 dB/1W, 1m
  • Frequency Range: 360Hz - 5kHz
  • Dimensions: 8.25”H x 12.75”W x 14.75”D
  • Weight: 6.2 lbs.
  • Color: Gray

Decibel Rating by Source of Sound

  • Threshold of Hearing - 0dB
  • Rustling Leaves - 10 dB
  • Whisper - 20 dB
  • Normal Conversation - 60 dB
  • Busy Street Traffic - 70 dB
  • Vacuum Cleaner - 80 dB
  • Large Orchestra - 98 dB
  • Walkman at Max Level - 100 dB
  • SPC40RT Wired Speakers- 108dB
  • Front Row of a Concert - 110 dB
  • Threshold of Pain - 130 dB
  • Military Jet Takeoff - 140 dB

Download Spec Sheet

 

VP207

The BRG VP207 Indoor Wired Speakers are an economical solution for multiple speakers on a single floor of a building. The emergency messages are sent wirelessly to the VP210 Amplifier/receiver and then played on the speakers wired into the system. Depending on the number of speakers required per floor this might be a less expensive option than placing wireless speakers throughout the facility. Discuss what option is best for your situation.


Combined with VP210 Amplifier/Receiver, the powerful VP207 20 Watt wired horn speakers makes them an excellent choice for office paging and public announcements.

These speakers are easily connected to the VP210 with two speaker wires. The wired speakers are activated at the same time as BRG’s wireless speakers and message boards.

Speaker wire is not included with the VP207. However, BRG offers a variety of speaker wire as an option to meet your installation needs.

Speakers require the purchase of a MA-1200 to operate with the BRG EMN System.

 

VP207 Wired Indoor Speaker Features:

  • 20 Watts RMS Power/ 100V
  • 250 Ohm Impedance
  • Plastic horn
  • Plastic cover
  • Aluminum ring
  • Steel mounting bracket
  • Sensitivity: 108 dB/1W, 1m
  • Frequency Range: 360Hz - 5kHz
  • Dimensions: 8.25”H x 12.75”W x 14.75”D
  • Weight: 6.2 lbs.
  • Color: Gray

Decibel Rating by Source of Sound

  • Threshold of Hearing - 0dB
  • Rustling Leaves - 10 dB
  • Whisper - 20 dB
  • Normal Conversation - 60 dB
  • Busy Street Traffic - 70 dB
  • Vacuum Cleaner - 80 dB
  • Large Orchestra - 98 dB
  • Walkman at Max Level - 100 dB
  • VP207 Wired Speakers- 108dB
  • Front Row of a Concert - 110 dB
  • Threshold of Pain - 130 dB
  • Military Jet Takeoff - 140 dB

Download Spec Sheet

SP2x2-W

The BRG SP2X2-W Indoor Wired Ceiling Speakers are an economical solution for multiple speakers on a single floor of a building. With their easy installation, just drop them into a 2’X2’ drop ceiling grid and connect the speaker wire. The SP2X2-W even comes with a 23” cross bar for facilities that have s 2’X4’ ceiling grid system.The emergency messages are sent wirelessly to the MA-1200 Amplifier/receiver and then played on the speakers wired into the system. Depending on the number of speakers required per floor this might be a less expensive option than placing wireless speakers throughout the facility. Discuss what option is best for your situation.Combined with MA-1200 Amplifier/Receiver, the SP2X2-W 30 Watt wired ceiling speakers makes them an excellent choice for office paging and public announcements. These speakers are easily connected to the MA-1200 with two speaker wires. The wired speakers are activated at the same time as BRG’s wireless speakers and message boards. Speaker wire is not included with the SP2X2-W. However, BRG offers a variety of speaker wire as an option to meet your installation needs.

Features:

  • 20 Watts RMS/ 60 Watts Max
  • 8” Polypropylene woofer with rubber surround
  • 3/4” Mylar dome tweeter
  • Frequency Response: 50Hz - 20kHz
  • Sensitivity: 90 +/- 3 dB
  • Impedance: 8 ohms
  • Selector Switch: 70/25 Volt
  • Transformer Settings: 20, 10, 5, 2.5, 1.25, and 8 ohms
  • Dimensions: 23”W x 23”H x 6”D
  • Weight: 7.1 lbs.
  • Color: White

Download Spec Sheet

 

VP208

The BRG VP208 Indoor Wired Ceiling Speakers are an economical solution for multiple speakers on a single floor of a building. With their easy installation, just drop them into a 2’X2’ drop ceiling grid and connect the speaker wire. The VP208 even comes with a 23” cross bar for facilities that have s 2’X4’ ceiling grid system.The emergency messages are sent wirelessly to the VP210 Amplifier/receiver and then played on the speakers wired into the system. Depending on the number of speakers required per floor this might be a less expensive option than placing wireless speakers throughout the facility. Discuss what option is best for your situation.Combined with VP210 Amplifier/Receiver, the VP208 30 Watt wired ceiling speakers makes them an excellent choice for office paging and public announcements. These speakers are easily connected to the VP210 with two speaker wires. The wired speakers are activated at the same time as BRG’s wireless speakers and message boards. Speaker wire is not included with the VP208. However, BRG offers a variety of speaker wire as an option to meet your installation needs.

Features:

  • 20 Watts RMS/ 60 Watts Max
  • 8” Polypropylene woofer with rubber surround
  • 3/4” Mylar dome tweeter
  • Frequency Response: 50Hz - 20kHz
  • Sensitivity: 90 +/- 3 dB
  • Impedance: 8 ohms
  • Selector Switch: 70/25 Volt
  • Transformer Settings: 20, 10, 5, 2.5, 1.25, and 8 ohms
  • Dimensions: 23”W x 23”H x 6”D
  • Weight: 7.1 lbs.
  • Color: White

Download Spec Sheet

MA-1200 Receiver/Amplifier

MA-1200 Features:

  • UHF receiver
  • 1200 Watt amplifier
  • Headphone jack
  • Left & right output level controls
  • Circuit protection indicator
  • A/B speaker selection switches
  • Unbalanced RCA inputs
  • Channel A & B speaker outputs
  • Switched AC accessory outlet
  • Dimensions: 19”W x 3.5”H x 19”D
  • Rack mountable

Download Spec Sheet

VP210 Amplifier

VP210 Features:

  • BRG VoIP Interface
  • 1200 Watt amplifier
  • Headphone jack
  • Left & right output level controls
  • Circuit protection indicator
  • A/B speaker selection switches
  • Unbalanced RCA inputs
  • Channel A & B speaker outputs
  • Switched AC accessory outlet
  • Dimensions: 19”W x 3.5”H x 19”D
  • Rack mountable

Download Spec Sheet

Copyright 2014 © BRG Precision Products, All Rights Reserved                                                                  600 River Street Derby, Kansas 67037  Phone 316.788.2000  Fax 316.788.7080
  Created by Jacques Designs, LLC